 |
 |
 |
|
PACKAGING: Part A-10 g (packaged in a jar) and Part B-5 g
Silver/Graphene Conductive Epoxy G6E-SG™ is a two component adhesive intended for high performance bonding, sealing and coating purposes. We use a proprietary mix of silver and graphene materials to achieve a superb combination of mechanical and electrical properties. G6E-SG™ adhesive performs two primary functions. First, conductive adhesives form joints with sufficient strength to bond two surfaces together, and second, an electrical interconnection forms between the two bonded surfaces. Traditional epoxy materials tend to be brittle and are prone to mechanical failure. Graphene fillers add superior durability, fatigue and crack resistance in addition to low electrical resistance.
G6E-SG Product Information
TWO COMPONENT SYSTEM: Part A – smooth thixotropic silver paste, Part B – smooth thixotropic silver paste.
THE MIX RATIO: 100 (Part A) to 50 (Part B) by weight.
CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following rates: 24 hours @ 25°C, 3 hours @ 80°C or 1 hour @ 150°C
COLOR: Silver
POT LIFE: 3 hours
GLASS TRANSITION TEMPERATURE: >90°C
Mixed Viscosity: 110-120 Pa·sec at 25°C/77°F
Hardness, Shore: >70 D
Volume Resistivity: ≤ 0.0001 Ohm x cm
STORAGE: Shelf life: 12 months at 25°C, in unopened, unmixed containers. Stores and ships at room temperature—no freezing or dry ice required
MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A and mix slowly until uniform in a separate container.
SAFETY & HANDLING: Please read the SDS before use. Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged breathing of vapor and contact with skin. Wash with soap and water to remove from the skin.
Packaging: Part A-10 g (packaged in a jar) and Part B-5 g and Part A-30 g (packaged in a jar) and Part B-15 g. This epoxy can also be supplied in various different packaging based on customer’s needs.
Potential applications include:
- Solder replacement
- Attachment of electro optical components
- Grounding
- Repair of defective traces / tracks or creating smooth jumpers on PCB board.
- Lightning Strike Protection and EMI/RFI Shielding
- Low temperature bonding of electrical modules
- High frequency shields, waveguides
- Terminal attachment to solar cell panels
- Quick and inexpensive LED mounting
- Conductive traces on 3D printed parts
- Radio-frequency identification (RFID) tags
- 3D antennas
- Easy repair of household electronics and car rear window defroster.
|
|
|
 |
|
 |
|